How do I confirm that the forks match my pallet dimensions when ordering a CZ25-06 telehandler?

When ordering an Onchtech CZ25-06 telehandler, confirm both dimensional compatibility and load suitability. The forks fitting into the pallet establishes only basic dimensional compatibility; adequate load support and actual load capacity must also be verified.

Check pallet dimensions and fork specifications

• Pallet entry openings and entry direction: Check the opening dimensions and the direction from which the forks will enter the pallet.
• Fork length and spacing: Verify that the selected forks match the pallet dimensions and provide adequate support for the load.
• Load weight and center of gravity: Confirm these alongside the dimensional checks to assess actual load suitability.

Provide the following information before ordering

To support the compatibility review with Onchtech, provide:

• Pallet length, width, and height
• Pallet entry opening dimensions
• Fully loaded weight
• Intended load placement location

Confirm compatibility against the applicable load chart

Final compatibility must be confirmed using the selected fork specifications and the applicable load chart. Do not rely solely on the machine’s rated capacity or on the fact that the forks can enter the pallet.