Which interface parameters should be confirmed before fitting hydraulic attachments to a CZ50-10 telehandler?

Before fitting a hydraulic attachment to an Onchtech CZ50-10 telehandler, check mechanical mounting, hydraulic supply, and control requirements together. First, confirm whether the selected CZ50-10 configuration provides the auxiliary hydraulic circuits required by the attachment.

Interface parameters to confirm

• Mechanical mounting: Confirm that the attachment’s mechanical connection is compatible with the machine.
• Auxiliary hydraulic circuits: Verify that the selected machine configuration provides the circuits needed by the attachment.
• Supply flow and working pressure: Check both parameters against the attachment’s technical requirements.
• Coupling specifications: Verify the hydraulic coupling specifications, rather than relying on their appearance.
• Return-line requirements: Confirm the attachment’s hydraulic return requirements.
• Separate case drain and electrical controls: Check whether the attachment requires a separate case drain line or an electrical control interface.

Information to provide before purchase

For compatibility confirmation, provide the following attachment information:

• Attachment model
• Technical specifications
• Connection drawings

Physical fit alone does not establish compatibility. Even if an attachment can be mechanically mounted, its hydraulic and control system compatibility must still be confirmed. Coupling appearance or mounting dimensions alone are not sufficient to determine whether it can be used.