What site dimensions should be measured to assess whether the SAL-18J can be used for canopy maintenance?
2026-10-30
Frequently Asked Questions about Products
Onchtech SAL-18J canopy maintenance assessment requires measuring work-point height, horizontal distance from the machine position, obstacle height and clearance, access-route width and height, and turning space. Compare these with its 20.2 m maximum working height, 11.7 m horizontal outreach, 7.5 m up-and-over height, and 2.44 m stowed width.
Site measurements for SAL-18J canopy maintenance
To assess whether the Onchtech SAL-18J can be used for canopy maintenance, measure the work-point height, horizontal distance, obstacle height and clearance, access-route dimensions, and available turning space.
Dimensions to measure on site
- Canopy work-point height: Measure the height of the point where maintenance will be performed.
- Horizontal distance: Measure the horizontal distance from the planned machine position to the work point.
- Obstacle height and clearance: Measure the height of obstacles and the clearance needed to reach over them.
- Access-route width and height: Measure the width and height of the route the machine will use to enter the site.
- Turning space: Measure the available space for turning along the access route and at the work area.
SAL-18J specifications for comparison
Compare the site measurements with these SAL-18J dimensions:
- Maximum working height: 20.2 m
- Horizontal outreach: 11.7 m
- Up-and-over height: 7.5 m
- Stowed width: 2.44 m
Recommended Reading
Hot Products
Popular articles
INQUIRY
Do you need complete construction machinery or customized solutions?
Please fill in your product requirements, application scenarios, and contact information. We will provide suitable equipment suggestions and quotation plans based on your project needs.
- Rapid Response
- Professional selection
- Customization support