Can the CZ25-06 Telehandler Handle Your Pallet Load at Floor Height and Reach?
Delivering a pallet to a building floor requires more than matching its weight to a telehandler’s rated capacity. The machine must support the load at the required placement height and horizontal reach, with the intended attachment and load centre.
The Onchtech CZ25-06 is a compact rough-terrain telehandler with a rated capacity of 2,500 kg, a maximum lift height of 5.9 m, and a stated lifting capacity of 800 kg at maximum height. These specifications provide an initial screening reference—not confirmation that a particular pallet can be placed at a particular floor edge.
What the published specifications establish
Use the following CZ25-06 specifications to assess basic dimensional and handling requirements before requesting a task-specific capacity check.
| Specification | Published value | Relevance to pallet delivery |
|---|---|---|
| Rated capacity | 2,500 kg | Does not establish capacity at every boom position. |
| Maximum lift height | 5.9 m | A height reference, not proof of reach into a building. |
| Capacity at maximum height | 800 kg | Must be read with the applicable chart conditions; not a capacity rating for every horizontal reach. |
| Machine dimensions: length × width × height | 4,070 × 1,810 × 2,000 mm | Supports preliminary access and positioning checks. |
| Operating weight | 4,900 kg | Relevant to site planning, but insufficient alone to establish ground-bearing suitability. |
| Ground clearance | 380 mm | Relevant to site access; does not confirm safe lifting on uneven ground. |
Check the load at both height and reach
For delivery to a building floor, “floor-level loading” means positioning the pallet at the receiving floor elevation. The telehandler may need to stand back from the façade and reach beyond the floor edge. Reaching the required height alone therefore does not establish suitability.
- Define the complete load. Record the goods, pallet, packaging and any additional lifted items. Provide pallet dimensions and weight distribution so the load centre can be checked.
- Measure the receiving location. Identify floor elevation, required placement depth, access clearances and the machine’s possible standing position. Use the manufacturer’s reference points when translating site measurements into chart height and reach.
- Identify the attachment and configuration. Confirm the intended fork or other attachment, its rating and compatibility. Establish how attachment weight and load centre are accounted for in the applicable chart.
- Verify the operating envelope. Check the required height-and-reach combinations throughout the planned placement and withdrawal sequence—not only the final deposit point. Do not extrapolate capacity from the headline specifications.
- Review site conditions separately. Ground support, slope, nearby excavations, obstructions and receiving-floor capacity require assessment alongside the machine’s operating instructions and the site lifting plan.
Machine features relevant to positioning
The CZ25-06 combines a Rexroth hydraulic system, hydrostatic drive and pilot proportional control. These features support controlled travel and fine handling movements during positioning. Its front-wheel, four-wheel and crab steering modes provide options for manoeuvring in constrained work areas.
An enclosed cab and 10-inch display support the operator’s working environment. However, control features, steering flexibility and rough-terrain capability do not replace load-chart verification or site-specific safety checks.
Common capacity questions
Can the CZ25-06 lift 2,500 kg to 5.9 m?
The published specifications do not support that conclusion. They state a 2,500 kg rated capacity and an 800 kg capacity at maximum height. These are different operating references, not interchangeable ratings.
Does an 800 kg pallet automatically qualify for delivery at maximum height?
No. The actual horizontal reach, load centre, attachment and chart conditions still need verification. A pallet’s stated goods weight may also exclude the pallet and packaging.
What is the capacity at a specific horizontal reach?
It cannot be determined from the supplied specifications. No horizontal-reach capacity chart is provided, so a task-specific capacity figure should not be estimated from rated capacity or maximum lift height.
Prepare your pallet-delivery requirements for review
For a focused discussion with Onchtech, the equipment brand of Hunan Hongchang Machinery Co., Ltd., provide:
- Total pallet weight, dimensions and load-centre information.
- Receiving-floor height, placement depth and proposed machine setback.
- Required attachment and any configuration preferences.
- Site access dimensions, ground conditions and relevant obstructions.
Request the applicable CZ25-06 manufacturer load chart and configuration documentation before confirming equipment selection. The key decision is whether the complete load fits within the verified operating envelope for the planned task—not simply whether it weighs less than 2.5 tonnes.
Hot Products
Popular articles
INQUIRY
Do you need complete construction machinery or customized solutions?
Please fill in your product requirements, application scenarios, and contact information. We will provide suitable equipment suggestions and quotation plans based on your project needs.
- Rapid Response
- Professional selection
- Customization support