1.2 Ton Crawler Spider Crane for Confined-Space Lifting
View Product
Product Overview
1.5 Ton Crawler Spider Crane
Onchtech 1.5 Ton Spider Crane combines a 1.7 t lightweight design with 6.5 m maximum lifting height and 6 m working radius for indoor and outdoor lifting in confined spaces. Its 0.65 m narrow tracked chassis supports glass curtain wall installation, rooftop lifting, substations, municipal works and factory maintenance. Honda, Koop and BAILITONG engine options are available with Euro V or EPA emissions compliance, plus OEM/ODM customization.
- Maximum Working Radius
- 6 m
- Climbing Ability
- 25° (36%)
- Maximum Lifting Height
- 6.5 m
- Optional Equipment
- Wireless remote controller, torque limiter, lifting basket and hydraulic airbag
- Engine Options
- Honda standard; Koop and BAILITONG optional; gasoline or diesel configuration
- Overall Dimensions
- 2.5 m L × 0.65 m W × 1.5 m H
Core Advantages
Confined-Space Access
Tracked Terrain Mobility
Stable Outrigger Support
Configurable Power and Controls
Related Products
1.2 Ton Crawler Spider Crane for Confined-Space Lifting
View Product
2-Ton Spider Crane for Narrow-Space Lifting
View Product
Onchtech 3 Ton Crawler Spider Crane for Confined-Space Lifting
View Product
4 Ton Crawler Spider Crane for Confined-Space Lifting
View Product
Product Parameters
| 1.5 Ton Crawler Spider Crane Basic Parameters Table | ||
|---|---|---|
| Category | Parameter Name | Parameter Value |
| Basic Parameters | Self-weight | 1.7T |
| Maximum Operating Radius | 6m | |
| Maximum Ground Lift Height | 6.5m | |
| Winches | Hook Rising Speed | 0-8m/min (4 ropes) |
| Wire Rope Specifications | Φ8mm × 45m | |
| Telescopic Device | Boom Form | 2m × 4-section lifting arm (customization available) |
| Boom Length / Time | 6.5m / 20sec (customizable) | |
| Luffing Device | Boom Angle / Time | 0-78° / 13sec |
| Rotation Device | Rotation Angle / Speed | 0-360° continuous rotation / 60sec |
| Outrigger | Outrigger Movement Type | Manual screw-out + hydraulic automatic support (three-section retractable outriggers) |
| Maximum Extension Amplitude | 3600mm (length) × 3400mm (rear) × 3400mm (front) | |
| Running Gear | Walking Mode | Hydraulic drive |
| Walking Speed | 0-2.5km/h | |
| Gradeability | 25° (36%) | |
| Engine | Voltage | Standard AC380V (custom voltage available) |
| Manufacturer | Handa (Koop, Briggs & Stratton (custom options available)) | |
| Emission Standard | China Stage II / Euro Stage V / EPA (optional by market) | |
| Model Number | 390CC | |
| Start Mode | Electric Start / Manual Start | |
| Start Performance | -50℃ ~ 45℃ | |
| Fuel / Volume | Gasoline / 8L | |
| Battery Capacity | 12V 60AH | |
| Noise Level (rated speed, 1m) | ≤81.5 dBA | |
| Operating System | Type of Operation | Manual boom and outrigger operation, manual travel, optional remote control operation |
| Operating Mode | Manual operation (remote control optional) | |
| Standard Configuration | Gasoline engine, diesel engine replacement available | |
| Vehicle Size | Overall Dimensions | 2.5m (Length) × 0.65m (Width) × 1.5m (Height) |
| Track | Track Specifications | 180mm (Width) × 72mm (Pitch) × 37 Sections |
| Optional | Optional Accessories | Torque controller, remote control, cradle, hydraulic flying jib; optional colors: red, green, yellow, white, grey and black |
Product Details
COMPACT CRAWLER SPIDER CRANE
Onchtech 1.5 Ton Crawler Spider Crane
The Onchtech 1.5 ton crawler spider crane is a compact lifting machine designed for indoor and outdoor work where access is restricted for conventional lifting equipment. Optional engines from Koop, Bailitong and other renowned brands are available, complying with Euro V and EPA emission standards. Combining a crawler undercarriage, telescopic boom and independently adjustable outriggers, it supports lifting and positioning tasks in narrow passages, factory interiors, rooftops, substations and municipal work areas. With a 0.65 m overall width, the crane is intended for contractors, industrial maintenance teams, project procurement groups and equipment distributors seeking a compact option for confined-space lifting and material handling.
Lifting Performance and Site Access
1.5 Ton Lifting Class
The 1.5 ton lifting class provides a compact basis for handling equipment, construction components and installation materials. Actual lifting capacity should be selected according to the required boom length, working radius and site conditions.
6.5 m Lifting Height
A maximum above-ground lifting height of 6.5 m supports elevated placement work such as façade installation, floor-level lifting and equipment positioning where vertical clearance is a key selection factor.
6 m Working Radius
The maximum working radius of 6 m helps operators reach lifting points offset from the crane position, which is useful when obstacles, building edges or limited setup space affect equipment placement.
0.65 m Compact Width
The 0.65 m machine width allows the crane to pass through standard indoor doorways and narrow access routes where larger truck-mounted or conventional mobile cranes may not be able to enter.
Crawler Mobility and Outrigger Setup
At an approximate machine weight of 1.7 t, this crawler spider crane combines a compact transport footprint with a rubber crawler undercarriage. The rubber tracks are suited to moving across indoor floors and finished surfaces where reduced ground marking is important, while also providing traction for site movement on suitable ground conditions.
The crane uses manually extended, hydraulically independently adjustable luffing outriggers. This support arrangement is intended to help operators establish a level and supported setup on locations such as steps, slopes and uneven work areas before lifting begins.
A four-section high-strength manganese steel telescopic boom and a user-oriented operating panel support direct control during lifting work. Onchtech can also provide OEM, ODM and OBM cooperation for customers requiring brand identification or configuration adaptation.
Application Scenarios
Glass Curtain Wall Installation
For indoor façade and glass installation, the compact width helps the crane enter building interiors or narrow approaches, while the boom reach supports placement at elevated installation points.
Rooftop and Floor-Level Lifting
On construction floors and rooftops with restricted equipment access, operators can use the 6 m working radius to position loads from an available setup location.
Substation Construction
In electrical construction areas, the crawler chassis and independently adjustable outriggers support equipment placement and lifting preparation where surfaces and access paths may be constrained.
Factory Equipment Maintenance
For large workshop maintenance, the crane can move through narrow routes to assist with lifting, removal or repositioning of components near production equipment.
Suitable Customers and Selection Considerations
This 1.5 ton spider crane is suitable for construction contractors, industrial maintenance operators, municipal project teams, equipment distributors and brand partners that need a compact crawler lifting machine for access-limited work. It is particularly relevant when doorway width, internal travel route, required lifting height, load weight and available outrigger setup area need to be considered together.
Before selection, confirm the load weight, required lifting radius, lifting height, ground condition, access dimensions and available setup space. If remote operation or load moment information is required for a project, wireless remote control and a moment display are available as optional configurations.
Share your lifting task, site layout and configuration requirements with Onchtech to evaluate whether this compact crawler spider crane matches the intended working conditions.
Hunan Hongchang Machinery Co., Ltd.
Full-Chain Smart Manufacturing; Full-Scope Engineering
Company Profile
50,000+ m²
Building area
20+ countries and regions
Product and service coverage
Within 1 hour
Customer response
100+
Global customers
Manufacturing & Partnership Capabilities
OEM / ODM / OBM customization
Supports customization of complete machine configuration, structure, brand, and product development to meet the needs of different markets and channels.
R&D and manufacturing system
Capable of collaborative development of complete machines, hydraulics, power systems, and structural components, supporting continuous product development and iteration.
Global delivery and service
Provides product delivery, technical support, spare parts, and after-sales service for global markets.
Emission adaptation for global markets
Covers emission standards such as China Stage II, China Stage III, China Stage IV, Euro V, and EPA, and supports power and emission configurations for different countries and regions.
INQUIRY
Do you need complete construction machinery or customized solutions?
Please fill in your product requirements, application scenarios, and contact information. We will provide suitable equipment suggestions and quotation plans based on your project needs.
- Rapid Response
- Professional selection
- Customization support